Specification
Reviews (0)
Instructions
Photo
Video
KRYTEX MEGA 10 is available only for authorized centers KRYTEX
Titan
a protective coating for the paintwork.
Properties:
- protects paint from fading and preserves the natural color;
- reduces the risk of chipping;
- reduces the risk of formation and development of corrosion;
- reduces the risk of damage to paintwork by car washes with low quality chemicals and low level of training of cleaners;
- creates the effect of anti-graffiti (2 layers);
- increases the gloss, depth and color saturation of the LWA
Specifications:
- Thickness 1 layer: 40-80 nm
- Wetting angle: 78 degrees
- Mohs hardness/shore: 5/95 units (Lac 87 units)
- Resistance to alkalies and acids: pH 1-14
- Resistance to solvents: alkane, aromatic
- Resistance to UV rays: 10-400 nm
- Durability: 100 contact sink/ 40,000 km/ 24 months
- Flow rate: 1-2 ml/m2
IMPORTANT!APPLICATION KRYTEX™ MEGA 10
1. To professionally prepare the surface of the paintwork, with a final degreasing using a professional degreaser-activator KRYTEX™ Degreaser (or any alcohol, without the content of the surfactant);
2. To make application of part 1 (the plots are 40 by 40 cm). It is important to evenly distribute the material along the work surface;
3. The average time of exposure of the applied composition to 1 minute depending on temperature and humidity;
4. To remove the excess material, you must use microfiber. The pressure should be light, movements are straight;
5. To produce the next layer maybe 45 minutes after application of a previous layer;
6. As a laminating - layer covers for KRYTEX™ MEGA 10, it is recommended to use "liquid glass" KRYTEX™ 7H+ or KRYTEX™ MEGA 8. To cause the lamination is also needed - 45 minutes after applying the previous layer.
Recommendations for use:
-avoid contact with water in the process of applying and the next 6-8 hours;
-the use of infrared lamps will speed up the curing process and enhance the properties of the coating;
-it is recommended to apply at least 2 layers of KRYTEX™ MEGA 10 for optimum protection;
-do not wash the vehicle with the use of chemicals after application 1-2 weeks.
1. To professionally prepare the surface of the paintwork, with a final degreasing using a professional degreaser-activator KRYTEX™ Degreaser (or any alcohol, without the content of the surfactant);
2. To make application of part 1 (the plots are 40 by 40 cm). It is important to evenly distribute the material along the work surface;
3. The average time of exposure of the applied composition to 1 minute depending on temperature and humidity;
4. To remove the excess material, you must use microfiber. The pressure should be light, movements are straight;
5. To produce the next layer maybe 45 minutes after application of a previous layer;
6. As a laminating - layer covers for KRYTEX™ MEGA 10, it is recommended to use "liquid glass" KRYTEX™ 7H+ or KRYTEX™ MEGA 8. To cause the lamination is also needed - 45 minutes after applying the previous layer.
Recommendations for use:
-avoid contact with water in the process of applying and the next 6-8 hours;
-the use of infrared lamps will speed up the curing process and enhance the properties of the coating;
-it is recommended to apply at least 2 layers of KRYTEX™ MEGA 10 for optimum protection;
-do not wash the vehicle with the use of chemicals after application 1-2 weeks.