Specification
Reviews (0)
Instructions
Photo
Video
Properties:
- protects paint from fading and preserves the natural color;
- reduces the risk of chipping;
- reduces the risk of formation and development of corrosion;
- reduces the risk of damage to paintwork by car washes with low quality chemicals and low level of training of cleaners;
- increases the gloss, depth and color saturation of the LWA
Specifications:
- Thickness 1 layer: 40-80 nm
- Wetting angle: 78 degrees
- Mohs hardness/shore: 4/94 units (Lac 87 units)
- Resistance to alkalies and acids: pH 3-12
- Resistance to solvents: alkane, aromatic
- Resistance to UV rays: 10-400 nm
- Durability: 50 pin sinks/ from 20000 km/ 12 months
- Flow rate: 1-2 ml/m2
IMPORTANT!
APPLICATION KRYTEX™ 9H+
1. pprofessionalno to prepare the surface of the paintwork, with a final degreasing using a professional degreaser-activator KRYTEX™ Degreaser (or any alcohol, without the content of the surfactant);
2. pto proizvoditi application of part 1 (the plots are 40 by 40 cm). It is important to evenly distribute the material along the work surface;
3. withrednee the exposure time of the damage until 10-30 seconds, depending on temperature and humidity;
4. haveto Dalat excess material must use the microfiber. The pressure should be light, movements are straight;
5. pproizvoditi to the next layer maybe 45 minutes after application of a previous layer;
6. in as a laminating - layer covers for KRYTEX™ 9H+, it is recommended to use "liquid glass" KRYTEX™ 7H+ or KRYTEX™ MEGA 8. To cause the lamination is also needed - 45 minutes after applying the previous layer.
Recommendations for use:
1. avoid contact with water in the process of applying and the next 6-8 hours;
2. using the IR lamp will accelerate the curing process and enhance the properties of the coating;
3. it is recommended to apply at least 2 layers of KRYTEX™ 9H+ for optimum protection;
4. do not wash the treated air equipment using chemicals after application 5-7 days.
