Polymeric protective coating for rubber.
Properties:
- protects the rubber from cracking;
- it retains its natural color;
- has the effect of darkening up to 3 months;
- has a dirt – repellent effect
Specifications:
- Thickness 1 layer: 120-180 nm
- Wetting angle: 103 degrees
- Durability: 3-6 months
- Resistance to alkalies and acids: pH 2-13
- Flow rate: 50 ml / 2 sets of wheels from 17 to 19 inches (one layer)
IMPORTANT!
APPLICATION
KRYTEX™ MEGA BLACK:
1. To wash rubber with a sponge (brushes), using detergents with high the content of the surfactant, it is desirable to do this on a professional cleaning with shampoo for motor;
2. Spray professional degreaser-activator KRYTEX™ Degreaser (or any the alcohol content without surfactant) microfiber (200-300 g/m2) and pressure on the rubber to produce the degreasing. Wait for complete drying. You can use a hair dryer to accelerate the drying process;
3. Application in the first layer. Using microfiber with an effort to RUB the composition into the surface rubber. This layer will be the "backing" for the following;
4. Application in the second layer. Using the same microfiber, after 10-15 minutes, apply with easy touch, like a brush, the composition of KRYTEX™ MEGA Black, evenly distributing it on the surface. To accelerate curing, it is desirable to use IR lamp or hair dryer, for another 5 minutes;
5. Exploitation you can start after 1 hour, avoiding contact with water until full cure (3 hours).
RECOMMENDATIONS MANUAL FOR:
- avoid
water ingress during application and the following 2-3 hours;
- first
the layer should be applied on clean and dry surface;
- using
IR lamps and a hair dryer will speed up the polymerization process and enhance the properties of the coating;
- at
increasing the number of layers will increase gloss;
- not
wash the car using the chemical after application 1 day